・Applicable for the high-temperature environments
　Ambient temperature : Max. 45℃
　Inlet air temperature : Max. 65℃
・Increased air flow capacity

* The production of the IDF22E to IDF75E series was scheduled to end in
　June 2022, but will be extended. We will announce the production end
　date separately.
　Click here for the IDF22E to IDF75E series catalog.

・Energy-saving design (Second re-heater + Digital scroll compressor)
・Power consumption: Reduced by up to 76%
・Exhaust heat: Reduced by up to 25%
・Tolerant of high temperature environments!
・Ambient temperature: Up to 45ºC, Inlet air temperature: Up to 60ºC

・Applicable for the high-temperature environments of tropical regions
・Can be used in high-temperature environments
　Ambient temperature : Max. 45℃
　Inlet air temperature : Max. 65℃
　Dew point range : 3℃ to 20℃
・Air flow capacity : 9.2 m3/min (52% increase compared to the
　current model)
・Power supply voltage : Single-phase 230 VAC (50 Hz)

・Applicable for the high-temperature environments
　Ambient temperature : Max. 45℃
　Inlet air temperature : Max. 65℃
・Increased air flow capacity
・Power supply voltage: Single-phase 230 VAC (50 Hz)

・EC Directive compliant product (With CE mark)
・Power supply voltage: Single-phase 230 VAC (50 Hz)

* The production of the IDFA22E to IDFA75E series was scheduled to end
　in June 2022, but will be extended. We will announce the production end
　date separately.

・Applicable for the high-temperature environments
　Ambient temperature : Max. 113ºF (45ºC)
　Inlet air temperature : Max. 149ºF (65ºC)
・Increased air flow capacity
・Power supply voltage: Single-phase 230 VAC (60 Hz)

・UL, CSA certified product
・Power supply voltage: Single-phase 115 VAC (60 Hz), 230 VAC (60 Hz)
　3-phase 460 VAC (60 Hz)

　 　Note) The air flow capacity for each dew point is indicated.

∗ The IDFB22E/37E series has been discontinued in August 2019.
　Please select the IDFB60/70 series.

・Stable supply of temperature and pressure controlled dry clean air
　Can supply compressed air with the same conditions and quality
　regardless of the season
・Application example:
　Supplying compressed air with constant conditions to air bearings mounted on
　a tool
・Built-in filter
　Nominal filtration: 0.01 μm (99.9% filtration efficiency)
　Outlet oil mist concentration: Max. 0.01 mg/m3 (ANR)
　Outlet cleanliness: Particles of 0.3 μm or more: 3.5 particles/L (ANR) or less
・Compatible with power supplies from around the world Single-phase 100, 200,
　230 VAC (50/60 Hz)

・Can supply dry air with a low dew point below –30ºC
・Compact and lightweight without a heater or an electric control board
・It is possible to check the outlet dew point with the indicator.
　(Self-regenerative type allows for easy maintenance)

・It is possible to easily supply dry air using the hollow fiber membrane.
・Non-fluorocarbon
・Power supply not required
・Compatible with low dew points (–60ºC)
・No vibration or heat discharge
・With a dew point indicator

・Prevents condensation in piping for small cylinders/air grippers
・Diffuses water vapor in the piping to the outside
・All you have to do is install the moisture control tube.
　Additional power supplies and works are not necessary.